Getting Started With Epoxy Cabinet Refinishing Kits

What do you do when your kitchen needs a facelift? Those cabinets are solid, they’re functional, but man, are they dated! One option many homeowners are turning to is cabinet refinishing kits. Many of these pre-built kits use a water-based epoxy coating to ensure that the cabinets get the most rock-solid finish possible without investing in a lot of professional grade equipment. But there’s a lot more to refinishing cabinets with these materials than opening the can and getting to work.

Prepping for an Epoxy Finish

If you’ve never heard it before, take this away with you: The biggest predictor of success for your DIY project is how well you prep your surfaces and work area. It’s really that simple, even though prep work can be pretty involved. Creating a clean, smooth, ready to coat cabinet door takes a lot of effort, but yields magnificent results. This is the number one secret of the pros, besides having all that fancy painting equipment.

So how do you prep for an epoxy cabinet refinish? There are steps.

1. Remove all the cabinet doors, drawer fronts, and hardware. Label each and store them where they won’t get lost or damaged. Using sticky notes to track cabinet doors can be a really good trick, since doors may look alike but not actually fit the same.

2. Fill any cracked surfaces with a compatible filler and sand it smooth. You can’t simply paint away problems in your cabinetry.

3. Clean your cabinet fronts, cabinet doors, and exposed finish on cabinet bases thoroughly to remove oils, spills, and other messes that will interfere with paint adherence.

4. Cover any surface that you don’t want paint on. This includes your backsplash and your countertops, and even your work area. This is not a material that you can necessarily just peel off should you have a drip.

5. Set up areas for your doors and drawer fronts to cure. Curing can take several days per painted side, so ensure the area is super clean and free of any drafts that could deposit dust and other debris.

Only once you’ve fully prepped your area should you begin the task at hand. Taping your cabinet bases can help keep the paint lines sharp, but remember to remove the tape while the paint is wet for the best results. It’s not always necessary to paint the insides of your cabinets, but should you choose to, remember that the pre-built kits are only designed to cover outer surfaces, so you’ll need extra coating material.

The Right Equipment Matters

Another important thing to know about using an epoxy cabinet refinishing kit is that the right equipment really does matter. Buy the right tools, and don’t just settle for a single brush or a single roller; they come in a variety of options for different jobs. Because rollers and brushes both create different textures depending on their design, it’s going to be really important to make the right choices here. Ask experts if you’re not sure. Rollers are not all the same, and there are lots of differences in naps and roller density. And brushes made of natural material are very different from synthetics.

The size and shape of your rollers or brushes also matter big time. Brushes in particular come in tons of different shapes, each meant to do specific jobs. For example, an angle brush will help you get into corners better, though they can also be used on the flat, open areas too, if you’re careful. Rollers vary dramatically in width, and bigger isn’t always better.

Whatever you do, though, don’t mix brushes with foam applicators of any sort. The resulting texture won’t be consistent and will likely drive you to refinish your cabinets yet again long before the epoxy coating is in need of refreshing.

Are You Cleaning These Spots Often Enough?

Cleaning up around the house is obviously an important task, and some areas require cleaning more often than others. There are some spots that might need a bit more attention than they’re getting, though. This is especially true for those areas that are out of sight or otherwise not as easily noticed as higher-profile and more visible areas that get cleaned on the regular. While the specifics of your cleaning and maintenance schedule will depend on your home and what you have in it, here are a few common areas for you to consider in case they’re not getting enough attention in your home.

Interior Cleaning

Most of the time when you think of cleaning in the house, you’re likely thinking of tasks like dusting, vacuuming, and other common indoor cleaning tasks. Here are a few other places to clean that might not be getting nearly as much attention as they need:

• Washer and dryer: You should clean your washing machine every week or two, or at least once a month if it isn’t used very often. The dryer should also be cleaned at least once a month, and make sure you take a vacuum and suck out some of the lint that might build up around your lint trap.

• Blinds: While dust on the blinds is the most obvious sign that they need to be cleaned, they also build up with grease and other dirt over time which can stick and even stain. Even if they don’t look like they need it, clean your blinds at least once a month.

• Refrigerator: The coils on the back of your fridge need periodic cleaning, but you should also clean the grill, shelves, and other internal locations as well. This not only keeps buildup from stopping airflow, but also helps to prevent food contamination.

• Furniture: If your furniture is upholstered, try to vacuum its surface at least once a month. This will get rid of crumbs and dirt while also cutting back on dust, dander, and other allergens that can plague you throughout the year.

These obviously aren’t the only locations that you need to hit when cleaning up around the house, but they’re some of the more easily overlooked. Other appliances and features of rooms that are frequently used might need to go on the list as well when thinking of what to clean.

Exterior Cleaning

There are a lot of areas outside that could probably use more attention than they’re getting. This can vary significantly depending on where you live and the features of your home and yard, but here are a few of the most common:

• External HVAC components: If you have central heat and air, you’ve likely got a large exterior unit that at best only gets cleaned once or maybe twice a year. If you rely on window-mounted air conditioners, those may get even less love. Check these components at least 3 or 4 times a year if not more often and remove built-up leaves, dirt, dust, and other potential hazards that could hurt their efficiency.

• Patios and walkways: Leaves, cut grass, and a variety of types of dirt can have a negative effect on walkways, stonework, and even wooden features like patios if left alone. They can cause unsightly stains, chips, and other decay. Clean these outdoor features at least once a month, and more often during the summer and fall when there’s a lot of mowing and falling leaves around.

• Garage doors: There’s a good chance that you clean your garage at least a few times per year, but what about the garage doors? Not only do the tracks need to be cleaned periodically to prevent dirt or debris from clogging them up, but you also might want to add some appropriate lubricant to the rollers at least once or twice per year.

• Gutters: If your home has gutters, you likely clean them at least once a year when the leaves are falling. What about other times, though? Falling seed pods, pollen, and even dirt and dust that washes down from your shingles can all have a negative effect on your gutters. Try to clean them at least once per season if not more often.

There are other areas that may be overlooked as well, such as bricks or siding and the outside of windows (which should be cleaned at least as often as the inside window glass is cleaned.) Stay mindful of this as you make a list of things to clean and maintain around the outside of your home.

Window Coverings Help Beat the Summer Heat

Keeping your home cool during the hot summer months can be an expensive prospect. This is especially true if you have large windows or rooms that have multiple windows that let sunlight in. While it’s great to have natural light during the day, it can work against your AC by heating up the air in those rooms at the same time you’re pumping cool air throughout the house. This can lead to your air conditioning running almost constantly throughout the day, and in some cases may even prompt an expensive HVAC upgrade if your current unit can’t keep up with the summer heat to your liking.

There’s some good news, though: It’s likely possible to cut your cooling costs during the summer without having to spend potentially thousands of dollars on a more powerful air conditioning solution. Through the use of various types of window coverings, you can make a big difference in how much heat is added to your home through your windows. Not only does this have the potential to cut your cooling costs significantly, but it can enhance the overall style of your home as well.

Curtains and Internal Coverings

Curtains, blinds, and other internal window coverings can have a significant impact on how much heat you gain from the sun during the summer. Medium to dark-colored curtains and drapes, especially those with white backings, block sunlight and heat gain significantly and can also help to hold heat in during the cold winter months. Blinds and rolling shades also offer some protection against heat gain, though their effectiveness depends on a number of factors including color, material, and reflectiveness.

Regardless of the covering type you choose, they are typically most effective when closed on south or west-facing windows, since these are the most likely to get direct sunlight during the hottest parts of the day. Closing the curtains or blinds on any window receiving direct sunlight can have at least some beneficial effect, however.

Window Films

One of the big problems with using coverings such as curtains and shades to prevent heat gain during the summer is that they block light and visibility as well as heat. If you still want to be able to see through your windows and enjoy some natural sunlight while preventing heat gain, a low-E window film might be a better option to meet your needs.
Low-E films are mildly tinted plastic films that have reflective particles of metal or metal oxide in them, reflecting UV rays while still allowing for some natural light and visibility. Because the UV rays are reflected back out into the outside, they are not able to heat up the air inside of your home. While the effectiveness of low-E films can vary depending on the manufacturer, thickness of the film, and how well they are installed, it’s estimated that some low-E films can reduce summer heat gain from sunlight by as much as 70 percent or more.

Shutters and Other Upgrades

There are a variety of other upgrades you can make to your home that will also help to block UV rays and prevent unwanted heat gain during the summer. Functional shutters that can be closed during the heat of the day can make a significant difference in solar heat gain, blocking the sunlight from actually reaching your windows in the first place. Awnings installed over windows can also block some light and heat, while still allowing for some visibility. Exterior solar screens are also an option, blocking UV rays and increasing your energy efficiency while preserving some light and visibility as well.

Add More Kitchen Storage With Cabinet Pull-Outs!

It’s wonderful to walk into a home that has lots of counter space, just stretching out like barren land ready for you to populate it with your favorite kitchen gadgets. But even a kitchen with limited counter space can be made so much more useful by better utilizing the thing that’s just below those counters: your lower cabinets. Lower cabinets are some of the most poorly utilized spaces in kitchens absolutely everywhere. No one wants to bend over to sort through dark and poorly organized cabinets, so eventually those spots just get kind of forgotten and ignored. This is where pull-out cabinet units can massively transform your space.

What are Pull-Out Cabinet Storage Units?

If you’re not familiar with pull-out cabinet storage units, well, welcome to a world of storage options you may have never even imagined. Pull-out cabinet storage basically turns the inside of your cabinet into pull-out bins, often resembling drawers or racks. So instead of getting down on your knees to dig around until you finally find that one pot lid you desperately need, you need only slide the drawer open, select it from the proper spot, and go on your merry way. These are a great way to increase the usability of your kitchen cabinets, improve your kitchen organization, and generally make you feel like you’ve got some cool stuff going on behind those very average closed doors. There are several different types out there, here are the main ones:

• Trash bins. Some of the original pull-out units were designed with stashing a trash can in mind. They’re still a popular choice for cabinets with no internal drawers or plumbing in the way, since many people don’t like to leave their trash exposed. Some units will hold just one can, but others have space for an additional trash can, which can be used for things like recycling.

• Internal drawers. Internal drawers are exactly what they sound like they should be. When you open the cabinet, you’re immediately confronted with drawers hidden just inside the door. This can be handy for small items, or if you’re not entirely sure what you want to stash inside your cabinet. The enclosed construction is pretty flexible and allows you to add things like dividers, should you want to toss your entire spatula collection in one, for example.

• Pull-out racks. Metal racks are often less expensive than full-on drawers, but they are really better suited for larger items like pan lids, baking pans, pots, and the like. Closely resembling dishwasher racks, pull-out racks come in a range of designs, some with more flexibility in organization than others. They’re a great option for all those awkward things that generally get tossed in the lower cabinets, but watch the height on the bins. Some are very short, which would be bad news for top-heavy items or things you intend to stack.

Sizing Cabinet Pull-Outs

Choosing the right size of pull-out can feel a little counter-intuitive. There are several inches lost to clearance and hardware when you install a unit, so there’s a lot of temptation to choose one that’s too large and try to make it fit in order to maximize your space. This is the worst possible thing you can do. It may seem like you’re losing space, but remember that you’re adding tiers and levels of organization you could have only dreamed about in the past, so really, unless your cabinet is highly unusual, it’s a net gain.

Start by measuring the clear cabinet opening, which is the space between where the opening to your cabinet starts and where the door to the cabinet swings. If your door will move completely out of the way when opened, measure to the hinges. If it won’t, angle it so it intrudes as little as possible and measure from the open side to the door. Your final cabinet insert should be about an inch more narrow than the clear cabinet opening to allow for hardware. You’ll also want to measure the depth of the cabinet from the inside of the cabinet face to the back side of the unit. The goal is for the final depth to allow for the door to shut over your pull-out unit, concealing it completely.

Clever Uses for Useless Spaces

There are a lot of areas around the home that may seem kind of useless or wasted. Partial dividing walls, areas below (or even above) a staircase, or little nooks or alcoves that were created by the house’s unique design are all common examples. You might not think much about these areas, but if you consider them for a moment, you might see how they could be some serious missed opportunities. With a little bit of creativity, though, you can change all of that for the better.

That blank wall around a doorway doesn’t have to stay empty, and the space under the stairs isn’t just for boy wizards anymore. There are a number of ways that you can revamp these empty and otherwise useless spaces and make your home more functional and fun in the process. Here are just a few ideas to get you started.

Surfaces and Seating

Look around your home at the various nooks and crannies that seem to just be empty space. With a little bit of work, it’s easy to add seating, tables, desks, and more to these areas and make them much more functional. Once you start thinking creatively, a whole wealth of options opens up.

Some of the open space in your foyer could have benches added for you and your family to sit and get your shoes on in the morning, possibly with bins that slide under the benches to keep those shoes in when they’re not being worn. A little alcove could be a great place to install a small desk or computer workstation for homework, bill paying, creative writing, or even grabbing a quick bite to eat. You could even stick a chaise lounge or part of a sectional couch in a largely unused corner to give people a private place to wind down or relax. And this is just the tip of the iceberg.

Storage and Organization

Some of these seemingly useless places can be a great place to add storage solutions to your home. Shelves and cabinets can instantly transform empty walls, giving you additional storage even in the small spaces around doorways or in closets. Drawers are also great additions, as are sliding cabinet racks that pull out and then slide fully back into the wall. There are even more options available if you really want to get creative.

If your kitchen has a small dividing wall separating it from other rooms, consider adding a built-in wine rack within it to hold a few of your favorite bottles. A pull-out vertical cabinet next to the sink or stove can also be a great area to add a spice rack or store cutting boards. Bookcases are relatively easy to install, and if you have a large unused area, it might even be an ideal place to add a built-in pantry. Not only do details like these really liven up your home, but they can also help reduce clutter in other areas and make everything a bit more organized in general.